Lake Champlain Bridge Takes Shape

07/25/11 7:34AM By Melody Bodette
 MP3   Download MP3 

VPR Photo/M.Bodette
The archway of the Lake Champlain Bridge rests on the shore in Port Henry, New York. Cables still need to be added before the structure can be moved to the bridge site.
(Host) Construction of the Lake Champlain Bridge connecting West Addison, Vermont and Crown Point, New York has been moving forward this summer.

The bridge's signature archway is now assembled and appears ready to be moved to the site of the new bridge.

But as VPR's Melody Bodette reports, there's still more work to be done before that next stage of the project.

(Bodette) On the shores of Lake Champlain, Port Henry, New York has a new attraction this summer. It's a 400-foot long, 83-foot high steel archway that's being built here -- a few miles north of the bridge under construction in Crown Point.  

A team of workers wearing orange-vests are bolting connections, while on-lookers check out the progress.

Mike Allen of Witherbee, watches from a bench at the nearby fishing access with a friend.

(Allen) "It's quite a project, it's something to do, I'm retired and I come down everyday to see them work on it."

(Bodette) Still Allen, is eager for the return of the bridge and the end of a temporary ferry that's been running in its place:

VPR Photo/M. Bodette
Port Henry, New York is proud to be "Home of the Arch." Some locals check out the arch's construction daily.
(Allen)"That ferry's an awful pain to get back and forth you know you've got to plan two hours ahead of time to get over there and, then you get held up on the way back if you happen to hit it when everybody's getting off of work."

(Bodette) The bridge is scheduled to open in October, but the project has encountered delays because the marina where the arch now stands was under-water for over a month, after record flooding this spring.

New York State Department of Transportation Engineer John Grady says while the arch steel has been assembled, cables still need to be put in place:

(Grady) "The cable work is very intricate work, all the cables and the anchorage have to be installed, a lot of tensioning has to be done, they have to be balanced. We're looking at least a month more of work on our arch."

(Bodette) When the 1.8 million pound arch is ready it will be floated down the lake to the bridge site where it will be raised.

All of the steel at the bridge site is up and waiting. Meanwhile, the bridge contractor, Flatiron, has begun pouring the concrete decks.

Engineer John Grady says hot weather can be a problem:

(Grady) "It can have an impact on the placement of concrete because, it is not optimal to placing concrete in extreme heat. So oftentimes we will place our concrete we'll start very early in the morning or late in the afternoon, so we can take advantage of cooler weather".

VPR Photo/M. Bodette
Steel approach spans on the Lake Champlain Bridge have been assembled, and pours are scheduled for the concrete decks.
(Bodette) The deck will be placed on the archway after it arrives. Then sidewalks and railings will need to be installed. Grady says transportation officials are in active discussions with the contractor to determine whether the bridge will open on October 9th as scheduled.

Back in Port Henry, Mike Lautenbacher is fishing off a pier in sight of the arch.

(Lautenbacher) "I think it's fabulous, I want to see them float it up, that's going to be a feat in itself. They say it will float, but I guess we'll see." 

(Bodette) For many the arch's arrival at the bridge site will mean the end of construction is near.

For VPR News, I'm Melody Bodette in Port Henry, New York.

Tags

lake_champlain_bridge cities
comments powered by Disqus
Supported By
Become an Underwriter | Find an Underwiter